玉溪市天賜家居建材超市有限公司
云南順強商品混凝土有限公司 云南華溪數控裝備有限公司 云南歐德佳數控精密機床制造有限公司 云南通海高新焊管有限公司 玉溪臺裕精機科技有限公司 玉溪順路機械設備銷售有限公司 云南玉溪中匯電力設備有限責任公司 鑫鑫模具五金機械配件廠 云南玉溪元生金屬表面處理劑廠 通海飛龍機械配件鑄造有限公司 玉溪興立機電設備維修有限公司 玉溪玉杯金屬制品有限公司技術中心 云南省玉溪市宏森水處理設備有限公司 云南玉溪通用機械廠 玉溪市水電設備有限責任公司 玉溪市永東電工科技有限公司 云南瑞通鋼業有限責任公司 易門科源工貿有限公司 玉溪自強綠健生物工程有限公司 云南玉溪自強綠香科技開發有限 公司云南省玉溪市龍馬書屋 大理丹富經貿有限公司 云南玉溪恒源景石有限公司 玉溪天天亮家政服務公司 玉溪市叁義商行易門縣自來水廠 華寧縣自來水廠 玉溪市自來水公司 玉溪市云星服裝廠 玉溪市鐵礦產貿易有限責任公司 玉昆集團東前鋼鐵有限公司 通海華夏照明科技有限公司 鑫亞礦產開發有限責任公司 云南玉溪高魯山食用菌有限公司 玉溪湘溪食品有限公司 云南天宏香精香料有限公司 云南通海熱軋帶鋼廠 云南玉溪旭立電石有限責任公司 云南光學儀器有限公司 云南峨山礦冶（集團）有限責任公司 玉溪市太極節能科技開發有限公司 易門大戶豪物業管理有限公司 云南通變冷作鉚焊有限公司 通海通變金屬結構有限公司 通海一諾五金加工廠 云龍縣景泰生物科技有限公司 云龍縣云陽石材有限責任公司 云南別科裝飾工程有限公司 云南大理交通運輸集團公司 云南大理祥云大白橋石材廠 云南第一公路橋梁工程集團有限公司 云南京津(進出口）有限公司 云南省大理市氣象局 云南省水利水電工程有限公司大理分公司 云南小灣電站葛洲壩項目部 云南興瑞祥生物科技有限公司 |
A powerful, complete hydraulic pressure calibration system to cover a wide workload Fluke Calibration improved the hydraulic pressure calibration process with the introduction of E-DWT-H electronic deadweight tester. E-DWT-H is an electronic calibrator designed to deliver traditional hydraulic deadweight tester performance with digital measurement features and convenience. Some improvements offered by E-DWT-H include: · No weights to load and unload, transport or send out for calibration · Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature · No piston-cylinder changes · No significant sensitivity to level or vibration · Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration · Operates in any unit of measure, switching easily from one unit to the next The E-DWT-H is at home in metrology and calibration labs, on the production floor or in the field. It can operate with a wide selection of test mediums, including Sebacate calibration fluid, mineral oil, water and other liquids. ± 0.02 % of reading total one-year measurement uncertainty rivals the best laboratory deadweight testers. The E-DWT-H is used in the lab or instrument shop or can be taken into the field for performing in-situ calibrations and tests. This hydraulic pressure calibration system combines a high performance electronic reference pressure monitor and manually operated pressure generation and control hardware in a single, compact and rugged package. E-DWT-H offers the ease of use and precision of continuous, real time electronic pressure measurement with the simple and direct pressure control of high quality manual pressure hardware. E-DWT is named “electronic deadweight tester” because it is intended as a lightweight and easy to use, modern alternative to conventional piston-cylinder and weight based deadweight testers. The E-DWT’s electronic reference pressure monitor is a special version of RPM4, designated RPM4-E-DWT. RPM4-E-DWT can be configured with one or two high precision quartz reference pressure transducers (Q-RPTs) with ranges from 7 MPa (1 000 psi) to 200 MPa (30 000 psi). The RPM4-E-DWT is controlled locally by the operator using its front panel display, keypad and optional foot pedal or remotely by a computer using ASCII character command strings over its RS-232 interface. RPM4-E-DWT uses an AutoRange feature to automatically select the most appropriate Q-RPT and to optimize the E-DWT-H setup to cover the desired range of operation. When two Q-RPTs are included, a half-turn valve isolates and protects the Lo Q-RPT from high pressure when the Hi Q-RPT is in use. Visual and audible indicators assist the operator in setting the shut off valve correctly. The E-DWT-H includes the hardware necessary to fill and prime the system under test and generate and precisely adjust pressure up to 200 MPa (30 000 psi). The E-DWT-H can be powered with an optional battery/charger pack for use in locations where AC power is not readily available. High performance calibration made simple Fluke Calibration electronic deadweight tester kits feature E-DWT-H configurations combined with the accessories needed for a complete calibration system. Model 6531 options feature E-DWT-H configurations with a single quartz reference pressure transducer (Q-RPT) to offer percent of reading performance from 10 % to 100 % of device full scale. Model 6532 options feature an additional Q-RPT to maximize workload coverage, with percent of reading performance from 1 % to 100 % of device full scale. An included vacuum fill kit allows the E-DWT to be filled with your choice of compatible fluid, while eliminating problematic air pockets from the test circuit. Also included is a test station adapter to mount just about any pressure device to be tested without using PTFE tape or wrenches. 6531 and 6532 kits provide all you need to perform high level hydraulic pressure calibration right out of the box. · Pressure ranges available to 200 MPa (30,000 psi) · ± 0.02 % of reading total one-year accuracy, 0.025 % for two years · Low torque variable volume allows for pressure generation and control up to 200 MPa (30,000 psi) with minimal physical effort · Built-in priming system to fill system with test fluid and purge unwanted air to assure smooth operation · Unique test port design eliminates the need for PTFE tape or wrenches. Adapters included for 1/8 in, 1/4 in, 3/8 in and 1/2 in NPT, 1/8 in, 1/4 in, 3/8 in and 1/2 in BSP, M20 x 1.5 and M14 x 1.5 · Compatible with a wide range of liquids, including water. Vacuum fill kit included to fill the E-DWT with any compatible test medium · AutoTest™, AutoRange, ready/not ready indicator, onboard data capture and storage, overpressure alarm, RS-232 remote interface and other advanced features to simplify testing, improve safety and prevent calibration errors and damage to equipment · Optional foot switch accessory allows hands-free data collection when running AutoTests · Rechargeable battery pack and transport case options for field operation
·
·
1. Combined linearity, hysteresis, and
repeatability. Precision does not include stability or calibration reference
uncertainty.
通用配件:
，，
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
       |
| 地址：青島市嶗山區海爾路29號溫哥華花園5-1-401 電話：0532-86069117 83812497 83821263 傳真：0532-88786387 網址：www.enablrclm.com 青島東方嘉儀電子科技有限公司 版權所有 備案號: 魯ICP備08106748號 
|
 |